1. All surfaces must be clean, sound and free from foreign materials.

2. Pour Part B (liquid) into a clean container - Slowly add Part A (powder) into the container and mix with a slow speed mechanical mixer until the mixture reaches a homogenous state. Allow the mix to stand for 5 minutes and re-stir manually before use.

3. For horizontal and vertical surfaces, a roller or paint brush may be used to apply the slurry. Care must be taken to ensure that air is not entrapped in the membrane. Allow the membrane to dry approximately 10-15 mins prior to application of the second coat. The second must be applied crosswise. After applying the second coat of waterproofing membrane, allow a minimum curing time interval of 15 – 72 hours.

1. All surfaces must be clean, sound and free from foreign materials.


2. Pour Part B (liquid) into a clean container - Slowly add Part A (powder) into the container and mix with a slow speed mechanical mixer until the mixture reaches a homogenous state. Allow the mix to stand for 5 minutes and re-stir manually before use

3. For horizontal and vertical surfaces, a roller or paint brush may be used to apply the slurry. Care must be taken to ensure that air is not entrapped in the membrane. Allow the membrane to dry approximately 10-15 mins prior to application of the second coat. The second must be applied crosswise. After applying the second coat of waterproofing membrane, allow a minimum curing time interval of 15 – 72 hours.

All surfaces must be clean, sound and free from foreign materials.

For every 25kg bag, mix 8 – 8.25 liters of water. Using a plastic container, place clean water in the container and add HYDROCRYSTALLINE. Mix thoroughly using a slow speed electric drill fitted with paddle for 3 – 5 minutes until desired homogeneous paste is achieved.

3. To prevent surface cracking, curing must begin as soon as the PERFECT SEAL CAPILLIARY WATERPROOFING has reached initial set. Moist curing using continuous water spray is recommended.

4. For horizontal and vertical surfaces, a roller or paint brush may be used to apply the slurry.

5. Keep HYDROCRYSTALLINE treatments moist and by spraying surfaces with a fine mist of water three times a day for 2 – 3 days.

1. All surfaces must be clean, sound and free from foreign materials.

2. Mix liquid part TOTAL SEAL HYBRID CAPILLIARY WATERPROOFING to its powder part. Mix thoroughly using a slow speed electric drill fitted with paddle for 3 – 5 minutes until desired homogeneous paste is achieved.

3. To prevent surface cracking, curing must begin as soon as the TOTAL SEAL HYBRID CAPILLIARY WATERPROOFING has reached initial set. Moist curing using continuous water spray is recommended.

4. For horizontal and vertical surfaces, a roller or paint brush may be used to apply the slurry.

5. Keep TOTAL SEAL HYBRID CAPILLIARY WATERPROOFING treatments moist and by spraying surfaces with a fine mist of water three times a day for 2 – 3 days.

1. All surfaces must be clean, sound and free from foreign materials.

2. Stir the product well before using. No dilution/mixing with water is required.

3. Apply UVFLEX PU WATERPROOFING onto the substrate using a roller, brush, or spray. 2-3 coats is recommended for concrete firewalls and GI roofing. 4-6 coats is recommended for concrete roof decks especially for foot trafficable roof decks.

4. Allow 2-4 hours in between each coat depending on thickness and atmospheric conditions. 2-3 coats of UVFLEX PU WATERPROOFING.

1. All surfaces must be clean, sound and free from foreign materials.

2. Stir the product well before using. No dilution/mixing with water is required.

is achieved using appropriate mixing paddle attached to a low-speed electric drill.

3. Apply UVFLEX PU WATERPROOFING ANTI-ROOT onto the substrate using a roller, brush, or spray. 2-3 coats is recommended for concrete firewalls and GI roofing. 4-6 coats is recommended for concrete roof decks especially for foot trafficable roof decks.

3. Allow 2-4 hours in between each coat depending on thickness and atmospheric conditions. 2-3 coats of UVFLEX PU WATERPROOFING ANTI-ROOT.

1. All surfaces must be clean, sound and free from foreign materials.

2. Mix 1-part water to 2 parts WONDERPLUG by volume. Due to rapid setting, use only the quantity which can be placed within the prescribed time.

3. Apply the mixed WONDERPLUG in place, ensuring maximum contact with the substrate before the material sets. If being used to plug a running water leak, the mixed WONDERPLUG should be held in place until it reaches initial set.

4. WONDERPLUG is fast is a rapid setting and ultra-curing compound, capable of waterproofing for even a wet substrate in seconds. Normal setting time is 60-120 secs at 30degC.

High pressure variant is available.

1. As a sealant. Clean and dry the surface before application. Remove all laitance, dust, oil, contaminants and previous coating from area of application, Scrape off flaking paint and any loose material. Apply VERSASEAL ELASTIC SEALANT on the area of application with the use of spatula. The use of plastic type funnel is also recommended. Do not dilute with water.

2. As a waterproofing membrane. For vertical and horizontal application Clean and dry the surface before application. Allow new concrete to cure for minimum of 28 days. Dilute part of VERSASEAL ELASTIC SEALANT to half part water. Mix thoroughly in separate clean container. Apply the mixture with a brush or a roller over the substrate. For roof decks, basement 3-5coats for walls, kitchen toilet and bath:2 coats.

Allow the substrate to cure for minimum of 28 days. The substrates must be dry, clean and sound, free of dust and other loose particles. Stir the product well before using. No dilution/mixing with water is required.

2. Apply ACRYSEAL ACRYLIC PRIMER to concrete substrate. Primer is not needed for G.I. roofs.

is achieved using appropriate mixing paddle attached to a low-speed electric drill.

3. Apply ACRYLIC WATERPROOFING onto the substrate using a roller, brush, or spray. Fiber mesh can be included on the membrane. Embed the mesh after applying the first coat. Make sure that the first coat is still wet when embedding the mesh.

4. Allow 2-4 hours in between each coat depending on thickness and atmospheric conditions.

Highly recommended for the waterproofing of roof deck, concrete gutters, toilet and bath, G.I. Roofing and Roof tiles and as protective coating for Polyurethane Foams.

DRYING TIME: Touch dry in 45 minutes and can be recoated after 24 hours.

COVERAGE: 24 sqm per gal @ 1 coat

To ensure the optimum adhesion, scratch the surface with sandpaper or steel wool. Make sure that the surface is clean, dry and free from grease, dirt and oil.

Gradually build the membrane by applying multiple thin coats. Allow 30 mins of dying time in between coats. The number of coats depends on the porosity of the substrate. The proper drying time in between coatings will allow for the proper absorption of the product.

3. Allow for 24 hours for the product to completely cure. Cool temperatures and high humidity will slow cure. It is not a structural component and it is not intended to bridge large voids. Overapplication may result in slumping, dripping, or unsightly appearance.

COVERAGE: 13 to 15 sqm per per gallon

1. All surfaces must be clean, sound and free from foreign materials.

2. Mix 1L of Hydroflex Fusion with 1kg Portland Cement - Mix until a homogenous state is achieved, then allow the mix to stand for 5 minutes and re-stir manually before use.

3. Apply 1 coat of the mixture to the corners of walls and floor. Then, apply at least 2 additional coatings to the concrete substate. Apply perpendicularly between coatings. If first coat’s brush stroke is up-down, 2nd coat should be left-right. This will allow brush marks to still be sealed on the second coat

4. Allow for 15mins of curing before applying the next layer if needed.

INTEGRA INTEGRAL WATERPROOFING should be added to a freshly mixed concrete with a recommended ratio of 0.8% to 1% by weight of cement. As a result of the chemical reaction of OPTICOAT INTEGRALSEAL to the cement, the curing time is expected to be 30% faster.